Product introduction

ANYPOL

  • HOME >
  • Product Introduction >
  • ANYPOL

ANYPOL EPS resin

It is an expandable bead which contains a blowing agent. According to its application, it is divided into flame retardant and general purposes. It is an environmentally friendly product that the immediate order and production are possible according to the specially purposed products since it is developed and produced based on our own technology.

Characteristics of ANYPOL EPS

  • Short aging time
  • Good molding process
  • Short cycle time and good fusion
  • Low thermal conductivity and good strength

Grade and use of ANYPOL EPS

Grade and use of ANYPOL EPS
Item Grade Main bead size(mm) Recommended density(g/l) Application Certification standard
Construction Large form Middle form Small form
Flame retardant SE-1600 1.18~1.60 13~17 UL-94HF ICBO DIN-4102
SE-2000 0.90~1.18 14~20
SE-2500 0.78~0.90 15~25
SE-3000 0.47~0.78 17~33
General CL-1600 1.18~1.60 15~18 JAPANESE FOOD APPROVAL
CL-2000 0.90~1.18 16~20
CL-2500 0.78~0.90 17~25
CL-3000 0.47~0.78 18~33

Above property values are standard representative values and not to be used as guaranteed values.

ANYPOL EPS Grade蹂 닕꽦떆媛

ANYPOL EPS Grade蹂 닕꽦떆媛
Grade Density(g/l) Ratio(times) Winter season (aging time) Summer season (aging time)
Minimum Maximum Appropriate Minimum Maximum Appropriate
SE-1600 20~25 40~50 3 60 24~30 2 48 20~26
17~20 50~59 4 48 18~24 3 36 14~20
14~17 59~71 4 48 12~18 3 36 8~14
SE-2000 25~30 33~40 3 72 24~30 2 60 20~26
20~25 40~50 3 60 18~24 2 48 14~20
15~20 50~67 4 48 12~18 3 36 8~14
12~15 67~83 4 48 6~12 3 36 4~8
SE-2500 25~30 33~40 2 60 20~30 1 48 15~20
20~25 40~50 2 48 14~20 1 36 10~15
15~20 50~67 3 36 8~14 2 24 6~10
13~15 67~77 3 24 4~8 2 48 3~6
SE-3000 30~40 25~33 2 60 20~30 1 18 15~20
25~30 33~40 2 48 14~20 1 36 10~15
20~25 40~50 3 36 8~14 2 24 6~10
15~20 50~67 3 24 4~8 2 18 3~6
  • Minimum aging time : time to make internal and atmosphere pressures the same and molding possible
  • Appropriate aging time : time to make internal and atmosphere pressures the same, molding good, residual blowing agent content proper, cycle time in molding shorten and fusion good
  • Maximum aging time : time to make residual blowing agent content in expanded bead decreased and poor fusion occur
  • Aging time in the second blowing : Second expansion in 2~4 hours after the first expansion (It is desirable to mold in 2~4 hours after the second expansion.)

top